ongoing

Transmission System Design Project

Designing an educational platform to demonstrate relationships between input speed, torque, and mechanical advantage through selectable gear ratios.

StatusongoingDatesSeptember 2026–presentRoleEngineering LeadAffiliationUniversity of Toronto
1

Context & question

Designing an educational platform to demonstrate relationships between input speed, torque, and mechanical advantage through selectable gear ratios.

Leading the conceptual design of a low-cost educational transmission platform with a multi-stage gearbox and selectable gear ratios to demonstrate input speed, torque, and mechanical advantage.

2

My contribution

  • Leading the conceptual design of the transmission platform and multi-stage gearbox.
  • Developing preliminary CAD, engineering drawings, and a bill of materials for candidate gearbox designs.
3

Outcome

This project is ongoing and will be updated soon.

4

Excerpts

Preliminary CAD excerpts from one candidate transmission design. Further excerpts will be added as my work progresses; these views are not a final or validated assembly.

Low gear position

Candidate low-gear configuration. The concept pairs a 20-tooth input gear with a 40-tooth output gear for a nominal 2:1 reduction and increased output torque before losses.

Side view of the candidate transmission with the selector in the low-gear position.
Neutral position

Candidate neutral configuration, with the selector positioned between the two gear engagements. This is a design view rather than a validated operating test.

Side view of the candidate transmission with the selector in the neutral position between the gear pairs.
High gear position

Candidate high-gear configuration. The concept uses a 30:30 gear pair for a nominal 1:1 ratio before losses; final design details remain in development.

Side view of the candidate transmission with the selector in the high-gear position.